Saga Far Infrared Sauna

Heat From Four Sides — Carbon fiber heating panels are positioned across the back wall, both side walls and beneath the bench, so warmth surrounds you evenly, including your legs.

Far Infrared Wavelengths (approx. 5–15 microns) — Far infrared warmth fills the cabin, creating an enveloping heat experience designed to support relaxation, circulation, and recovery. This range includes about 9.4 microns, the wavelength of the infrared heat the human body naturally gives off.

Low-EMF Heating System — Manufacturer testing measured 0 mG at a typical 12-inch (30 cm) seating distance, with a reading of just 0.13 mG directly against the heating panel.*

Spacious 4-Person Design — A generous cabin provides comfortable space for up to four people, making Saga ideal for shared sessions while offering an exceptionally spacious experience when used solo.

Powerful 3500W Heating System — A high-output 3500W heating system supports the larger 4-person cabin, delivering consistent far infrared warmth throughout the space.

240V Hardwired Installation — Saga requires a dedicated 240V / 20A circuit with a hardwired electrical connection rather than a household outlet. Installation should be completed by a qualified electrician in accordance with applicable local electrical requirements.

Canadian Hemlock Construction — Crafted from Canadian Hemlock inside and out, with a natural wood exterior finish and clear tempered glass for a warm, natural look.

Smart Wellness Controls — Set your preferred temperature and session time from the integrated touch control panel. Bluetooth, FM radio, USB connectivity, and an integrated resonance speaker let you personalize your session.

Solid 1.8 in (46 mm) Walls — Thick Canadian Hemlock wall panels and 8 mm (0.31 in) tempered glass give the cabin a solid build that helps hold the heat in.

Thoughtful Interior Details — A built-in cup holder and towel hook keep everyday essentials conveniently within reach during your session.

*EMF measurements based on manufacturer testing conducted inside the sauna cabin. Readings measured 0.13 mG directly against the heating panel (0 in / 0 cm) and 0 mG at both 4 in (10 cm) and 12 in (30 cm) from the heating panel.

Capacity
4 people

Dimensions
78.7 × 42.9 × 76.8 in
2000 × 1090 × 1950 mm

Power
3500W

Infrared System
Far infrared
Carbon fiber heating panels
Heat zones: back wall, both side walls, under the bench
Approx. 5–15 μm wavelength range
Low EMF — 0 mG at 12 in (30 cm)*

Construction
Interior: Canadian Hemlock
Exterior: Canadian Hemlock, natural wood finish
Glass: Clear tempered glass
Wall thickness: 1.81 in (46 mm)
Tempered glass thickness: 0.31 in (8 mm)

Controls & Features
Touch control panel
Bluetooth
FM radio
USB connectivity
LED spot light + strip lighting
Resonance speaker
Towel hook
Cup holder

Electrical
240V / 20A dedicated circuit
Hardwired installation required
Installation by a qualified electrician

*Manufacturer testing inside the sauna cabin: 0.13 mG directly against the heating panel (0 in / 0 cm) and 0 mG at 4 in (10 cm) and 12 in (30 cm).

Ships from the USA

Saga ships from our U.S. fulfillment center in Fort Worth, Texas. Free curbside delivery is included within the contiguous United States (lower 48 states and Washington, D.C.).

Delivery Time

Delivery time varies by location. Once your order ships, you'll receive tracking with an estimated delivery window.

Curbside Delivery

Saga arrives unassembled in a single wooden crate and is delivered curbside. The crate measures approximately 80 × 82 × 28 in (2020 × 2080 × 700 mm) and weighs approximately 730 lbs (331 kg), so please arrange adequate assistance and equipment to move it from the delivery point to your installation location.

Simple Two-Person Assembly

Saga is designed for straightforward home assembly and can typically be assembled by two people in under two hours. The sauna arrives unassembled, with the cabin panels and components designed to fit together on-site.

240V Hardwired Installation

Saga requires a dedicated 240V / 20A circuit with a hardwired electrical connection and does not plug into a household outlet. Electrical installation should be completed by a qualified electrician in accordance with applicable local electrical and building requirements.

Assembly Guide — Download PDF →

User Manual — Download PDF →

Every Eld & Frost sauna includes a 1-year limited warranty beginning on the date of delivery.

Unopened saunas in their original sealed crate may be returned within 30 days of delivery, subject to our return conditions.

View full Warranty & Returns Policy →

Does Saga require special electrical installation?

Yes. Saga requires a dedicated 240V / 20A circuit with a hardwired electrical connection and does not plug into a household outlet. Electrical installation must be completed by a qualified electrician in accordance with applicable local electrical and building requirements.

How difficult is Saga to assemble?

Saga is designed for straightforward home assembly and can typically be assembled by two people in under two hours. Before shipping, each sauna is fully assembled and tested at the manufacturer’s facility, then carefully disassembled and securely packed for transport. This helps ensure that all components fit correctly and the sauna is functioning as intended before it leaves the factory. A detailed Assembly Guide is available below.

What type of infrared heating system does Saga use?

Saga features a far infrared heating system with carbon fiber heating panels on the back wall, both side walls and beneath the bench, distributing consistent, enveloping warmth throughout its spacious 4-person cabin. The panels operate within an approximate 5–15 micron wavelength range. This range includes about 9.4 microns, the wavelength of the infrared heat the human body naturally gives off. The system delivers a comfortable sauna experience that supports relaxation and complements your recovery routine.

Does Saga have low EMF levels?

Yes. Saga uses a low-EMF heating system. Manufacturer testing measured 0 mG at a typical 12-inch (30 cm) seating distance, with a reading of just 0.13 mG directly against the heating panel.

How many people can use Saga?

Saga is designed as a 4-person sauna, providing generous interior space for shared sessions while also offering a more spacious experience when used solo.

Where can I install Saga?

Saga is designed for indoor home use. It should be installed on a stable, level surface in a suitable location with access to the required dedicated 240V / 20A hardwired electrical connection.

How is Saga delivered?

Saga ships unassembled in a single wooden crate and is delivered curbside. The crate measures approximately 80 × 82 × 28 in (2020 × 2080 × 700 mm) and weighs approximately 730 lbs (331 kg). Due to its size and weight, please arrange adequate assistance and equipment for delivery day.

Does Saga include red light therapy or chromotherapy?

No. Saga is focused on far infrared heat, with LED spot and strip lighting. If you would like dedicated red light therapy and chromotherapy as well, Sunna (1-person) or Aurora (2-person) include both.